Chassis Centralized Lubrication System

FZV-3-200A Type low pressure lubrication systems are specially designed for automotive chassis bus and truck, trailer, engineering machinery. It is suitable for NLGI 000# - 0# lubricant. The system generally runs at low pressure, typically the output pressure is rated to 3.8Mpa.
Applicable system:

This motorised grease pump is applicable for AD type volumetric distributor, RH-3 type volumetric distributor, 35 type pressure volumetric distributor to combine with low pressure grease lubrication system. When not installing pressure relief valves to AP type motorised grease pump, it is applicable for U type progressive distributor, SD type progressive distributor to combine with low pressure grease lubrication system.

Model: FZV-3-200A
Reservoir Capacity: 3 L
Material of Reservoir: PC Material
Grease Range: NLGI #0-000#
Voltage: DC24V/12V
Motor Power: 40 W
Discharge Capacity: 200 ML/MIN
Output pressure: 3.8Mpa
Oil Outlet Diameter(max): M16*1.5
Protected Rate: IP55
Overall Dimensions: 268mm (L) X 175mm(H) X 154mm(W)

1. System
Lubrication system consists of lubrication Pump, ECU controller, ZXQ quantitative relief-type distributor Or QT86 quantitative pressure -type distributor, the main oil pipeline, oil Separator tubes, wire harnesses, pressure sensors, fittings accessories and Other components.

2. The system works described
Setting working hours and resting time which is accord to the Controller unit issued a directive on the lubrication pump, the lubrication Pump motor driven gear pump to work, Oil transport to the distributor by The main oil pipeline, Oil separator by the distributor, the oil lines into the Friction points lubrication points.

Installed in the main oil pipeline at the End of the pressure sensor in the rated pressure, the pressure signal is sent To the controller. After receiving the pressure signal the controller to Determine lubrication system working properly, the automatic control Operation.